As we all know, the engine is the heart of your heavy equipment. You may think that it is a simple machine with simply moving parts, but even the smallest and most ordinary engine contains an excess of complex mechanisms and elements. This means you need to take great care of everything when it comes to maintaining your compactor’s engine.

If you own a compactor, you want to make sure that your engine lasts long enough when it’s getting old. A compactor engine is indeed a great part of it which keeps it running. But you must know how to maintain them well to ensure longevity and improve productivity.

Let’s take a look at some of the important tips that may help in better taking care of your compactor’s engine.

  1. Keep the engine clean

The engine of all the used construction equipment must be in better condition, as it provides power to the machine. If you use your compactor every day, it’s good practice to clean the inside of the engine every month or so. This removes all dirt that might otherwise build up over time and cause problems later on. However, regularly remove the deposits of any debris that accumulates on the bottom of your compactor’s engine. You’ll also need to check regularly for any oil leaks, which can cause problems with your electrical system. Also, make sure, don’t let water get into anything because this could cause major problems with your compactor’s engine.

  1. Check for leaks and drips

If your compactor is leaking oil, then it’s best to have this fixed as soon as possible. The reason why this happens is that the seals on the engine tend to wear out over time. When this happens, they allow moisture into the engine, which leads to corrosion and rusting. This will also cause problems with your compressor’s performance and efficiency, so it’s important that you address this problem right away.

  1. Check the air filter

It’s important to check your compactor’s air filter regularly, or you may experience problems with your engine. If you find that your compactor has a clogged filter, you should clean it out with a brush and a high-pressure water hose.

Once you’ve cleaned out the clogs, make sure that the air filter is properly fitted in place by tightening the screws on each side of it until they’re snug but not overly tight. You should change it after every 3 months or 100 hours of use.

  1. Remove carbon from the piston

The most common problem with engines of used compactors for sale is carbon buildup in the pistons. This can cause many problems, including poor fuel usage and reduced engine performance.

To remove carbon from the piston, use an air horn to blow out any debris that may be blocking the passages. Then run the engine for five minutes to ensure that all of the gunk has been removed.

  1. Lubricate your engine’s parts

Lubricate your compactor’s engine at least once a month by using high-quality grease. The lubrication will keep the bearings from wearing out and the clutch from seizing. Low-grade lubricants may impact the performance of the engine make sure to check the quality of grease or lubricant before using them in the engine of used compactors.


The compactor’s engine is an essential part of the equipment that keeps it running. The engine needs to be in top-notch condition to keep the compactor’s performance up to the mark. In this article, you will find some easy tips to maintain the compactor’s engine so that you may not need to compromise on its performance.